PIPE JOINTS THE WORLDChinajsgj
CONTACT
Home > Products > Steel Pipe Fittings >

carbon steel LR SR Elbows for water supply

carbon steel LR SR Elbows for water supply

carbon steel LR SR Elbows for water supply
carbon steel LR SR Elbows for water supplycarbon steel LR SR Elbows for water supplycarbon steel LR SR Elbows for water supplycarbon steel LR SR Elbows for water supplycarbon steel LR SR Elbows for water supply
CategoriesSteel Pipe Fittings
AlbumView larger image
BrandJS Pipe fittings
Size1/2
materialCS, MS
Usagewater, oil and gas
Surface treatmentblasting, black painting, anti-rust oil
EndsBevel ends
Connectionwelding
FOB portTianjin, Qingdao, shanghai , Ningbo
Terms of PaymentL/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal
Update Time2019-11-20
Detail Information
Butt weld Carbon steel LR SR Elbows for water supply
How to calculate the 90 degree Elbows?

For standard degrees of steel pipe elbows such as 45° and 90°, pipe elbow center to end dimensions are available in standard pipe charts. But many times, custom elbow angles are required at site which should be cut from standard 45° or 90° elbows.

Formula for calculating center to end distance of such elbows is as follows:

Elbow length in mm = Tan(Elbow Angle/2) X Elbow Radius in mm

Where:

For 90° Long Radius elbows, center to end dimension given in dimension tables of ANSI B16.9 is same as radius of elbow. This is because Tan(90/2) i.e. Tan 45 is 1.

Normally custom steel elbow angles from 45 degree to 90 are cut from 90 degree standard elbow. But for custom elbow angles smaller than 45 degree, JS FITTINGS elbow is normally cut from existing standard 45 degree elbow. Center to end dimension given in dimension tables for 45 degree elbow must be divided by Tan(22.5) to get elbow radius for standard 45 degree elbow. Then we can use above formula to get elbow angle for custom degrees.

Same procedure applies to 3D elbows.

Example 1:

Calculate elbow center to end dimension for 4 inch nominal pipe diameter elbow at 60 degree angle, cut from 90 degree LR elbow.

From ASME B16.9, center to elbow dimension for 4 in elbow is 152 mm.

Length = Tan (60/2) X 152

Length = 0.57735027 X 152

Length = 87.757 i.e. 88 mm Approx.

Example 2:

Calculate elbow center to end dimension for 2 inch nominal pipe diameter elbow at 30 degree angle, cut from 45 degree LR elbow.

From ASME B16.9, center to elbow dimension for 2 inch 45 degree elbow is 35 mm.

Radius of elbow = 35/Tan(22.5)

Radius of elbow = 35/0.4142 = 84.5 mm

Length = 0.26795 X 84.5

Length = 22.64 i.e. 23 mm Approx.

If you are interested in knowing more details of JS FITTINGS and have pending orders, please contact us directly!
Contact JS FITTINGS 

Contact: Lisa Wang

Skype: jsfittings

Email: admin@chinajsgj.com

Whats App/Wechat: +8618633894868
Product review
  • Loading...
Please send your message to us
*Email
Name
Tel
*Title
*Content

Agree to use terms of service

Upload
    Address
    Become A JS FITTINGS Customer
    Please send your message to us
    STEEL FITTINGS FOR PIPE CONNECTION

    The professional manufacturing capacity of JS FITTINGS strongly guarantee the high-quality products, competitive price and short delivery time.

    •  Free samples can be supplied. Customers need to pay for the courier cost, which will be returned in the following orders.
    •  All your inquiries will be replied in 2 hours and quotations will be supplied within 24 hours.
    • Once  the deposit is received during the contract valid time ,  JS FITTINGS will take full responsibility and obligation for accomplishment of the Contract.
    • The urgent order with 100% prepayment has the priority of delivery.
    Please send your message to us
    *Email
    Name
    Tel
    *Title
    *Content

    Agree to use terms of service

    Upload
      Address